Single Shaft Shredder

Product Video

Single Shaft Shredder Video

Product Description

Single Shaft Shredder

MSA-F Series Single Shaft Shredders are small to medium size reduction machines suitable for processing a wide range of materials to a uniform particle size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughputs typically range between 300kg/hr –10,000kg/hr+ depending on the model, material type and application.

MSA-F Series Single Shaft Shredders are widely used in the volumetric reduction of various waste products, including but not restricted to the following. Plastc Bottles, Plastic Pipes, Woven Bags, Electrical Cable, Waste Wood, Industrial Paper, Domestic Rubbish & Electronic Waste. A suitable screen can be chosen depending upon the materials being processed and the next processing requirement. The Output material discharged by the shredder could be an end product or the primary feed for the next process. The MSA-F Series Shredder can be equipped with many different rotor configurations. In addition, a cooling system, bead welds & an additional wear layer can be added.

Composition and Structure

Operation Principles

Material Pusher Structure Pushes the Material

The Material Pusher Structure is driven by the hydraulic cylinder to push the material to the blade shaft.

Material Shredding

The material is shredded through the mutual shearing between the movable blades and the fixed blades.

Screen Discharge

The shredded material is discharged through the screen system, and the particle size of the discharged material is determined by the aperture of the screen.

Product Applications

Product Details

Cutter Shaft Structure

V type rotor knives layout design, special heat treatment knife material DC 53, 4 sides can be used
The gaps between the rotor knives and counter knives can be adjusted
The cutter shaft with surfacing treatment can be used for shredding hard materials like light scrap metals

Screen Structure

The screen can be changed conveniently, the end products size depends on the screen mesh size
Machine has screen supports, which been controlled by the hydraulic cylinder, with safety switch
Customized screen mesh design depends on different materials

Material Pusher Structure

The chamber adopting advanced seal design, with adjustable copper guide blocks and integrated front guide plate
Dust leakage groove -- The dust will be removed from this groove, good protection for the hydraulic system

Power Drive System

High efficiency electric motor with star delta start, F1200 and F1500 with Hydraulic Coupler
Heavy Duty Gearbox - Adopting high safety factor models, connect with the cutter shaft directly
Gearbox damping device - prevent damage for the power drive system

Electric System

The electric cabinet is equipped with a Siemens/Schneider PLC
The electric cabinet boasts a touch screen with a high capability of promoting human-machine interaction
Siemens/Schneider electrical components are adopted

Technical Data Sheet

Model	MSA-F600	MSA-F800	MSA-F1000	MSA-F1200
Feeding Hopper(mm)	800×600	1300×800	1300×1000	1300×1200
Cutter Shaft Length(mm)	600	800	1000	1200
Discharge Height(mm)	490	565	565	565
Pusher Stroke(mm)	500	815	815	815
Rotor Knives Quantity(pcs)	23	35	45	55
Counter Knives Quantity(pcs)	4	4	4	6
Motor Power (kw)	18.5	37	45	55
Hopper Volume(L)	760	1500	1760	2030
Machine Size (mm)	1290×1820×1730	2800×1765×2080	2800×1980×2090	2800×2490×2135
Machine Weight(kgs)	1650	4000	4300	5300

Model	MSA-F1500	MSA-F2000	MSA-F3000
Feeding Hopper(mm)	1300×1500	1675×2000	1900×2000
Cutter Shaft Length(mm)	1500	2000	3000
Discharge Height(mm)	565	720	720
Pusher Stroke(mm)	815	1100	1100
Rotor Knives Quantity(pcs)	70	95	109
Counter Knives Quantity(pcs)	6	8	6+6
Motor Power (kw)	75	132*2	200*2
Hopper Volume(L)	2430	5500	6500
Machine Size (mm)	2800×2735×2135	3670×4374×2530	55802980×4080
Machine Weight(kgs)	5900	14500	28000

Successful Cases

Area:AUSTRALIA

Model:MSA-F1500

Area:USA

Model:MSA-F1200

Area:HONGKONG